Product Details:
Minimum Order Quantity | 5 Piece |
Brand | Rndmfg |
Model | HB100 |
Application | Industrial, Laboratory |
Power Source | Electric |
Frequency | 50 Hz |
Voltage | 220V |
Phase | Single Phase |
IP Rating | IP55 |
Packaing Type | Box |
Country of Origin | Made in India |
Product Details:
Sensing Distance | 5 mm |
Brand | Rndmfg |
IP Rating | IP50 |
Power Source | Electric |
Packaging Type | Box |
Voltage | 210 V |
Frequency | 50 Hz |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Phase | Single Phase |
IP Rating | IP55 |
Main Chip | LM393, on the radio-infrared head |
Packaing Type | Box |
Voltage | 220V |
Groove Width | 10 mm |
Frequency | 50 Hz |
Power Source | Electric |
Working Voltage | DC 5 Volt |
Country of Origin | Made in India |
Additional Information:
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Voltage | 220V |
Power Source | Electric |
Phase | Single Phase |
Packaing Type | Box |
Frequency | 50 Hz |
IP Rating | IP55 |
PCB Size | 36.0 mm x 25.00 mm x 1.5 mm |
Power | 2.3 or 5 V DC |
Compatible Interfaces | 2.54 3-pin interface and 4-pin Grove interface* |
Country of Origin | Made in India |
Vibration sensor module alarm Motion sensor module vibration switch SW-420 module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can adjust using an onboard potentiometer. When this no vibration, this module output logic LOW the signal indicates LED light, and vice versa.
If the module does not vibrate, the vibration switch was closed on state, the output of low output, the green indicator light. The product vibrates, vibration switches momentary disconnect, the output is driven high, the green light does not shine.
The output can be directly connected to the microcontroller, which to detect high and low level, so as to detect whether the environment exists vibration, play a role in the alarm.
It is useful for a variety of shocks triggering, theft alarm, smart car, an earthquake alarm, motorcycle alarm. This module when compared with a normally open pneumatic shock sensor module, shock triggered much longer can drive relay module the use of the company’s production of SW-420 normally closed type vibration sensors. comparator output signal clean wave well, driving ability, 15mA rated voltage and 3.3V-5V output: digital switching output (0 and 1) a bolt-hole for easy installation small Board PCB dimensions: 3.2cm x 1.4cm. using the wide LM393 voltage comparator.
Note:
Do not reverse the power directions, otherwise, it is possible to burn the chip
Signal LED light is output Low, signal LED OFF output is High
The output level close to the input voltage.
Features:
-Using SW-420 normally closed type vibration sensor
-Comparator output, clean signal, good waveform, strong driving ability, >15mA
-Using a wide voltage LM393 comparator
-With bolt holes for easy installation
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Model | GY-291 |
Packaing Type | Box |
Voltage | 220V |
IP Rating | IP55 |
Power Source | Electric |
Measurement | Up to +/- 16 g |
Model No | ADXL345 |
Phase | Single Phase |
Frequency | 50 Hz |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Pin Pitch | 2.54 mm |
Power Supply | 3-5 V (internal low dropout regulator) |
Model No | MPU-6050 |
Voltage | 210 V |
Frequency | 50 Hz |
IP Rating | IP55 |
Power Source | Electric |
Gyroscope Range | 250 500 1000 2000 deg/s |
Country of Origin | Made in India |
Product Details:
Frequency | 50 Hz |
Power Source | Electric |
IP Rating | IP55 |
Packaing Type | Box |
Phase | Single Phase |
Voltage | 220V |
Country of Origin | Made in India |
Product Details:
Brand | Rndmfg |
Power Source | 3-5 V DC |
Model | 3095 |
Mounting Height | 5 cm |
IP Rating | IP55 |
Packaing Type | Box |
Packaging Size | 1pcs |
Load Capacity | 12.5 mA |
Country of Origin | Made in India |
Product Details:
Type | Ultrasonic |
Voltage | 220V |
Frequency | 50 Hz |
Size | 46.0 x 30.0 x 17.6 mm |
IP Rating | IP55 |
Brand | Rndmfg |
Power Source | Electric |
Low Consumption Current | Max. 20 mA |
Phase | Single Phase |
Packaing Type | Box |
Country of Origin | Made in India |
his PM2.5 GP2Y1010AU0F Dust Smoke Particle Sensor is an infrared emitting diode (IRED) and a phototransistor are diagonally organized into this tool. It detects the contemplated light of dirt within the air. Especially, it's miles powerful to hit upon very high-quality particle just like the cigarette smoke. In addition, it may distinguish smoke from residence dust with the aid of the heartbeat pattern of the output voltage.
The module is especially used for dust removal system alarm device, air purification device, dust robots, fireplace alarm, and many others. Enterprise gadget can discover smoke debris, pollen spores, and different debris.
Features :
1. Compliant with RoHS directive (2002/95/EC)
2. Compact, thin package (46.0 × 30.0 × 17.6 mm)
3. Low consumption current (Icc: MAX. 20 mA)
4. The presence of dust can be detected by the photometry of only one pulse
5. Enable to distinguish smoke from house dust
6. Lead-free and RoHS directive compliant
"
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Voltage | 12 V |
IP Rating | IP55 |
Phase | Single Phase |
Frequency | 50 Hz |
Power Cord | 350 mm |
Model No | TEC1-12706 |
Power Source | Electric |
Dimensions | 40 mm x 40 mm x 3.6 mm |
Country of Origin | Made in India |
Product Details:
Brand | Rndmfg |
Model | HB100 |
Power Source | Electric |
IP Rating | IP55 |
Packaing Type | Box |
Voltage | 220V |
Frequency | 50 Hz |
Phase | Single Phase |
Country of Origin | Made in India |
Product Details:
Phase | Single Phase |
Wire Length | 2 meter |
Power Source | Electric |
Voltage | 220V |
Model No | P31 |
IP Rating | IP55 |
Packaing Type | Box |
Frequency | 50 Hz |
Country of Origin | Made in India |
Product Details:
Operating Current | Less Than 20 Ma |
Sensor Type | Analog |
Detection Area | 40 x 16 mm |
Operating Temperature | 10-30 Degree Celsius |
Humidity | 10% -90% non-condensing |
Dimensions | 62 x 20 x 8 mm (L x W x H) |
Weight | 3.5g |
Operating Voltage | DC3-5 V |
Product Details:
Frequency | 50 Hz |
Model No | T30 |
IP Rating | IP55 |
Brand | Rndmfg |
Phase | Single Phase |
Power Source | Electric |
Voltage | 220V |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 5 Piece |
Model No | AD8232 |
IP Rating | IP55 |
Packaing Type | Box |
Frequency | 50 Hz |
Indicator Display | LED Indicator |
Phase | Single Phase |
Brand | Rndmfg |
Operating Voltage | 3.3 V |
Jack for Biomedical Pad Connection | 3.5 mm |
Power Source | Electric |
Country of Origin | Made in India |
"The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-powerful board use to measure the electric hobby of the heart. This electric pastime may be chart as an ECG or Electrocardiogram and output as an analog studying.
ECGs can be extraordinarily noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily. The ECG module AD8232 coronary heart ECG tracking sensor module is an integrated signal conditioning block for ECG and different bio-capacity measurement applications.
The ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino is designed to extract, enlarge, and filter out small bio-capacity signals in the presence of noisy conditions; which include those created by motion or remote electrode placement.
Features :
1. Designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
2. Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart.
3. AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications.
4. ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op-amp to help obtain a clear signal from the PR and QT Intervals easily.
5. This electrical activity can be charged as an ECG or Electrocardiogram and output as an analog reading.
6. Leads-Off Detection.
7. Shutdown Pin.
8. LED Indicator.
9. Analog Output.
10. 3.5 mm Jack for Biomedical Pad Connection.
"
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Model Name/Number | TCS3200 |
IP Rating | IP55 |
Packaing Type | Box |
Stable Temperature Coefficient | 200 ppm/ Degree Celsius |
Voltage | 220V |
Single Supply Operation | 2.7 V to 5.5 V |
Power Source | Electric |
Frequency | 50 Hz |
Nonlinearity Error Typically | 0.2% at 50 kHz |
Country of Origin | Made in India |
"The TCS3200 Color Recognition Sensor Module makes use of a remarkable mild sensor allowing you to feel any colour through a mixture of Red, Green, and Blue. The module gives all the pins of the TCS3200 on convenient 0.1″ headers – best to be used with PCBs, breadboard or stripboard.
Four white LEDs offer plenty of light for the coloration sensor and let you use the module in any ambient mild.
The module requires handiest a unmarried deliver voltage among 2.7V and 5.5V – making it compatible with nearly all commonplace microcontrollers, such as PICs, AVRs, ARM, Arduino and extra!
Features :
1. High-resolution conversion of light intensity to frequency.
2. Chip pins all has drawn for standard 100.
3. Put the needle (2.54 mm).
4. Mil-convenient for bitmap board.
5. Programmable color and full-scale output frequency.
6. Communicate directly with a microcontroller.
7. Low-profile surface mount package.
"
Product Details:
Minimum Order Quantity | 10 Piece |
Output Voltage | H - 5 V, L - 0 V |
Operational Voltage | DC 5 V |
Static Current | 2 mA |
Working Frequency | 40 Hz |
Measurement Accuracy | 0.3 mm |
Distance Measurement Range | 3 cm - 400 cm |
Measurement Angle | 15 Degree Celsius |
Product Details:
Frequency Range | 11 KHz |
Brand | Rndmfg |
Size | Approx. 36 x 16 mm (L x W) |
Packaing Type | Box |
IP Rating | IP55 |
Power Supply | 0-15 V DC |
Hole Inner Diameter | Approx. 3 mm |
Model No | AH44E |
Comparator Output Current | 16 mA |
Product Details:
Working Voltage | 3.3 V-5 V |
IP Rating | IP55 |
Phase | Single Phase |
PCB Board Size | 3.2 cm x 1.4 cm |
Output | AO - analog output, DO - digital output |
Power Source | Electric |
Frequency | 25 Hz |
Packaing Type | Box |
Brand | Rndmfg |
Model No | HR202 |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Power Supply | 3 - 5 V |
IP Rating | IP55 |
Model Name/Number | GY30 |
Chip | BH1750FVI |
Light Range | 0 - 65535 lx |
Sensor Built in | 16 bit AD converter |
Size | 3.2cm x 1.5cm (L x W) |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 2 Piece |
Sensing Distance | 5 mm |
Voltage (V) | 5 VDC |
Degree of Protection | IP68 |
Material | Plastic |
Frequency (Hz) | 50 Hz |
Size | 3 to 80 mm |
Packaing Type | Box |
Country of Origin | Made in India |
Product Details:
Model Name/Number | DSM501A |
Voltage | 220V |
Phase | Single Phase |
Packaing Type | Box |
Power Source | Electric |
Frequency | 50 Hz |
IP Rating | IP55 |
Brand | Rndmfg |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Model / Part Number | MQ-3 |
Target gases | Ethanol vapour |
Operating Voltage | 5V |
Brand | Rndmfg |
Operating Humidity | 0-95%Rh |
Preheat Duration | Over 24 hour |
Operation Temperature | -10 to 70 Degree Celsius |
Heater Consumption | Less than 750 mW |
Product Details:
Shape | Round |
Packaging Type | Box |
Power Source | Battery |
Voltage | 210 V |
Frequeny | 50 Hz |
IP Rating | IP65 |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Frequency | 50 Hz or 60 Hz |
Packaing Type | Box |
Brand | Rndmfg |
Phase | Single Phase |
Material | PCB |
Power Source | Electric |
Voltage | 12.5 V |
IP Rating | IP55 |
Country of Origin | Made in India |
This module uses bright infrared (IR) LED and a phototransistor to detect the pulse of the finger, a red LED flashes with each pulse.
Pulse monitor works as follows:
Product Details:
Wide Force Sensitivity Range | 0.1N - 10N |
Phase | Single Phase |
Shape | Rectangle |
Frequency | 50 Hz |
Power Source | Electric |
Voltage | 210 V |
Diameter | 0.16 inch |
IP Rating | IP55 |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Rndmfg |
Shape | Square |
Application | Industrial |
IP Rating | IP55 |
Pitch | 0.1 inch |
Sensing Area | 1.75 x 1.5 inch |
Packaing Type | Box |
Country of Origin | Made in India |
"This is a pressure sensitive resistor with a square, 1.Seventy five x 1.5″, sensing location. This FSR will range its resistance depending on how a great deal strain is being implemented to the sensing vicinity. The harder the pressure, the lower the resistance. When no stress is being applied to the FSR its resistance will be larger than 1MΩ.
This FSR can feel implemented force everywhere inside the range of 100g-10kg. Two pins extend from the lowest of the sensor with 0.1″ pitch making it bread friendly. There is a peel-and-stick rubber backing on the alternative aspect of the sensing location to mount the FSR.
Just Connect a resistor to shape a voltage divider and degree the voltage at the junction to discover the pressure applied. These sensors are easy to set up and tremendous for sensing stress, however they aren’t relatively accurate. Use them to feel if it’s being squeezed, however you could no longer want to use it as a scale.
Dimensions: Overall duration: three.5″ Overall width: 1.Seventy five″ Sensing area: 1.75×1.Five″ Documents: FSR Integrating Guide Comments Write Your Comments
This sensor may be without difficulty interfaced with Microcontrollers, Arduino Boards, Raspberry Pi and so forth. The use of an Analog to Digital Converter (ADC).
Applications:
1. Testing and Measurement Equipment.
2. Embedded Electronics.
3. OEM Development Kit.
4. Consumer Electronics.
5. Multimeter.
________________________________________
Features:
1. Easily customizable to a wide range of sizes.
2. Cost-effective.
3. Ultra-thin: 0.45 mm.
4. Robust: up to 10 million actuations.
5. Simple and easy to Integrate.
"
Product Details:
Brand | Rndmfg |
IP Rating | IP20 |
Working Voltage Range | DC 4.5 V- 20 V |
Work Temperature | -20-+80 Degree Celsius |
Detection Cistance | 3-7M (can be adjusted) |
Detection Range | <120 Degree |
Delay Time | 5-200 Sec |
Packaing Type | Box |
Product Details:
Brand | Rndmfg |
Power Source | 3-5 V DC |
Packaing Type | Box |
Frequency | 50 Hz |
Phase | Single Phase |
IP Rating | IP55 |
Voltage | 220V |
Product Details:
Model / Part Number | MQ-135 |
Target gases | NH3,NOx, alcohol, Benzene, smoke,CO2 |
Operating Voltage | 5V |
Operating Humidity | 0-95%Rh |
Preheat Duration | Over 24 hour |
Detecting Range | 100-1000 ppm |
Rated Voltage | DC 5 V |
Detecting Type | Air Quality |
Additional Information:
Product Details:
Model / Part Number | MQ-7 |
Operating Voltage | 12V |
Brand | Rndmfg |
Packaing Type | Box |
Usage | Temperature Sensor |
Theory | Ultrasonic Sensor |
IP Rating | IP55 |
Voltage | 5 V |
Country of Origin | Made in India |
"MQ-7 CO Carbon Monoxide Coal Gas Sensor Module detects the concentrations of CO in the air and outputs its reading as an analog voltage. The sensor can measure concentrations of 10 to 10,000 ppm.
The sensor can perform at temperatures from -10 to 50°C and consumes much less than 150 mA at 5 V.
This module gives both digital and analog outputs. The threshold stage for virtual output may be effortlessly adjusted using the preset on the board. The MQ-7 sensor module may be effortlessly interfaced with Micro-controllers, Arduino and and so forth.
Features :
1. The analog output voltage, the higher the concentration the higher the voltage.
2. The carbon monoxide detection with better sensitivity.
3. There are four screw holes for easy positioning.
4. With a long service life and reliable stability.
5. Rapid response and recovery characteristics.
"
Product Details:
Brand | Rndmfg |
Load Capacity | 10 mA (DC 5V) or less |
Allowing Pressure | 1.75 Mpa |
Temperature | -25~+80 Degree Celsius |
Working Voltage Range | DC 5~18 V |
Operating Humidity Range | 35%~90%RH |
External Threads | 1/2 inch |
Use Temperature | 80 Degree or less |
Country of Origin | Made in India |
"This is YF-S201 Water Flow meter Measurement Sensor with 1-30Leter/min Flow Rate in black shade. This sensor sits in keeping with your water line and incorporates a pinwheel sensor to degree how lots liquid has moved via it. There’s an incorporated magnetic corridor impact sensor that outputs an electrical pulse with each revolution. The hall effect sensor is sealed from the water pipe and allows the sensor to stay secure and dry.
By counting the pulses from the output of the sensor, you can without problems calculate water flow. Each pulse is approximately 2.25 millilitres.
Note this isn’t a precision sensor, and the heart beat charge does vary a chunk depending on the flow rate, fluid stress, and sensor orientation. It will want cautious calibration if better than 10% precision is needed. However, it’s awesome for fundamental measurement responsibilities!
We have an example Arduino comic strip(take a look at the ATTACHMENTS tab) that is useful to speedy take a look at the sensor; it will calculate the approximate drift of water in liters/hour. The pulse sign is a simple square wave so it’s pretty smooth to log and convert into liters according to minute the use of the following formulation
Features :
1. The simple and compact module.
2. Easy to Install.
3. High Sealing Performance.
4. High-Quality Hall Effect Sensor.
"
Product Details:
Voltage | 220V |
Working Temperature | 10~30 Degree Celsius |
Weight | 3 g |
Size | 65 x 20 x 8 mm |
Power Source | Electric |
Frequency | 50 Hz |
Phase | Single Phase |
IP Rating | IP55 |
Output Voltage Signal | 0~4.2 V |
Country of Origin | Made in India |
Product Details:
Brand | Rndmfg |
IP Rating | IP55 |
Voltage | 220V |
Phase | Single Phase |
Packaing Type | Box |
Model No | Yf S401 |
Power Source | Electric |
Frequency | 50 Hz |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 10 Piece |
Brand | Rndmfg |
Packaging Type | Box |
IP Rating | IP55 |
Power Source | Electric |
Voltage | 220V |
Diameter | 0.5 inch |
Range | 100 g-10 kg |
Country of Origin | Made in India |
Product Details:
Minimum Order Quantity | 2 Piece |
Brand | Rndmfg |
Model No | GP2Y0A21 |
Power Source | Electric |
Phase | Single Phase |
Average Supply Current Typical | 30 mA |
IP Rating | IP55 |
Voltage | 220V |
Operating Supply Voltage | 4.5 V to 5.5 V |
Response Time | 38 +/- 10ms |
Frequency | 50 Hz |
Country of Origin | Made in India |
The distance sensor produced by Sharp is a popular and relatively low cost solution for measuring distance. The sensor can be used also for measuring the rightness or color (in very limited extent) but in this article we will talk only about measuring distances.The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 20 cm to 150 cm (8" to 60"); a plot of distance versus output voltage is shown below. The GP2Y0A02 uses a 3-pin JST connector that works with our 3-pin JST cables for Sharp distance sensors (included). It is also simple to solder three wires to the sensor where the connector pins are mounted (see the lower picture to the right). When looking at the back, the three connections from left to right (last picture) are output signal, ground, and the power.
Specifications:
Product Details:
Minimum Order Quantity | 2 Piece |
Brand | Rndmfg |
Supply Voltage | 5V DC |
Packaing Type | Box |
Current | Less than 20 mA |
Range | 2 cm to 400 cm |
IP Rating | IP55 |
Power Source | Electric |
Voltage | 220V |
Frequency | 50 Hz |
Phase | Single Phase |
Country of Origin | Made in India |
Product Details:
IP Rating | IP55 |
Packaing Type | Box |
Brand | Rndmfg |
Output Data Rate | Selectable 10SPS or 80SPS |
Voltage Range | 2.6 ~ 5.5 V |
Operating Temperature Range | -20 ~ +85 Degree Celsius |
Model No | HX711 |
Power Source | Electric |