RNDMFG
Send Email
Send SMS
Search

Home » Our Product Range » DC Geared Motor


DC Geared Motor

12VDCGEARED MOTOR-10 RPM,30RPM,45RPM,60RPM,100RPM,150RPM,200RPM,
500RMP,1000RPMBO1 DC GEARED-60RPM,75RPM,150RPM-BO2 DC GEARED-150RPM,300RPMBLDC MOTOR-1400KV,4000KV-SERVO 3.7G,9G,S3003,MG995 METEL GEARL293D DC MOTOR DRIVER,L298N DC Motor Driver,stepper Motor Drivedservo Motor Controller

L293d Driver

REQUEST CALLBACK

L293d Driver
  • L293d Driver
  • L293d Driver
  • L293d Driver
  • +7 L293d Driver
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 96 / PieceGet Latest Price

Product Details:
Minimum Order Quantity10 Piece
Model NumberL293D DIP
Input Voltage5 V
Output Power600 MA
External Power9V to 24V DC
Dimensional Size44 mm x 37 mm x 14 mm (l x b x h)
Temperature Range0 Degree C to +70 Degree C

The L293D motor driver is available for providing User with ease and user friendly interfacing for embedded application. L293D motor driver is mounted on a good quality, single sided non-PTH PCB. The pins of L293D motor driver IC are connected to connectors for easy access to the driver IC’s pin functions. The L293D is a Dual Full Bridge driver that can drive up to 1Amp per bridge with supply voltage up to 24V. It can drive two DC motors, relays, solenoids, etc. The device is TTL compatible. Two H bridges of L293D can be connected in parallel to increase its current capacity to 2 Amp.


Features:

  • Easily compatible with any of the system
  • Easy interfacing through FRC (Flat Ribbon Cable)
  • External Power supply pin for Motors supported
  • Onboard PWM (Pulse Width Modulation) selection switch
  • 2pin Terminal Block (Phoenix Connectors) for easy Motors Connection
  • Onboard H-Bridge base Motor Driver IC (L293D)


Additional Information:

  • Item Code: L293D
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 1000
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

Stepper Motor 5v 4- Phase

REQUEST CALLBACK

Stepper Motor 5v 4- Phase
  • Stepper Motor 5v 4- Phase
  • Stepper Motor 5v 4- Phase
  • Stepper Motor 5v 4- Phase
  • +7 Stepper Motor 5v 4- Phase
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 171 / PieceGet Latest Price

Product Details:
Minimum Order Quantity5 Piece
No of PhaseDC
Voltage5 V
Torque2 Kg
Step Angle5.625 x 1 / 64
Diameter28 mm
Reduction Ratio1 / 64

Specifications:

  • High quality
  • 5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for
  • Supporting the use of a direct plug and easy to use stepper motor used in the development board


Additional Information:

  • Item Code: STEPPERMOTOR
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

DC Motor Driver

REQUEST CALLBACK

DC Motor Driver
  • DC Motor Driver
  • DC Motor Driver
  • DC Motor Driver
  • +7 DC Motor Driver
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 160 / PieceGet Latest Price

Product Details:
Minimum Order Quantity10 Piece
Input PhaseSingle Phase
BrandL298H
Input Voltage12 V
Drive Plate Weight33 g
Driver Board Size55 mm x 60 mm x 30 mm
Temperature25 Deg C ~ +130 Deg C



Additional Information:

  • Item Code: l298n
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

DC Motor Driver

REQUEST CALLBACK

DC Motor Driver
  • DC Motor Driver
  • DC Motor Driver
  • DC Motor Driver
  • +7 DC Motor Driver
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 139 / PieceGet Latest Price

Product Details:
Minimum Order Quantity5 Piece
Model NumberL9110
Size27.0 mm x 21 mm
Voltage (Volt)12 V
Input TypeDC
Input PhaseSingle Phase
Working Temperature0-80 Degree
Power Supply VoltageDC2.5-12 V



Additional Information:

  • Item Code: l9110
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

38G Standard RC Servo Motor

REQUEST CALLBACK

38G Standard RC Servo Motor
  • 38G Standard RC Servo Motor
  • 38G Standard RC Servo Motor
  • 38G Standard RC Servo Motor
  • +7 38G Standard RC Servo Motor
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 375 / PieceGet Latest Price

Product Details:
Minimum Order Quantity10 Piece
Motor Type DC
Speed23 sec/60 @ 4.8V
Voltage12 V
Connector Wire Length150 mm
Weight (Kilogram)1.3 ounce (38 grams)
Length1.6" (40mm) X Width: .8" (20mm) X Height: 1.4" (44mm)
Bearing TypeBushing
Torque44 oz-in (3.2 kg-cm) at 4.8V



Additional Information:

  • Item Code: SERVOS3300
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 200
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

MG 995 55G Metal Gear High Speed Torque RC Servo Motor

REQUEST CALLBACK

MG 995 55G Metal Gear High Speed Torque RC Servo Motor
  • MG 995 55G Metal Gear High Speed Torque RC Servo Motor
  • MG 995 55G Metal Gear High Speed Torque RC Servo Motor
  • MG 995 55G Metal Gear High Speed Torque RC Servo Motor
  • +7 MG 995 55G Metal Gear High Speed Torque RC Servo Motor
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 536 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
BrandAny
Motor Type DC
Voltage12 V
Power15 Kg
Input Voltage6 V
Output Power4.8 V
Gear TypeAll Metal Gears
Connector WireHeavy Duty, 11.81" (300mm)



Additional Information:

  • Item Code: SERVOMOTOR
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

A2212 Brushless Motor 1400KV

REQUEST CALLBACK

A2212 Brushless Motor 1400KV
  • A2212 Brushless Motor 1400KV
  • A2212 Brushless Motor 1400KV
  • A2212 Brushless Motor 1400KV
  • +7 A2212 Brushless Motor 1400KV
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 516 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Voltage12 V
Size1inch
Speed1400RPM
Current0.3A
Weight50 g
Motor Dimensions27.6 mm x 11.5 mm
Shaft Size3.0mm
Battery Opernating2-3 Lipo
Peak Amps14-22 A



Additional Information:

  • Item Code: A2212BLDCMOTOR
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

KV4000 RC Helicopter Outrunner Brushless Motor

REQUEST CALLBACK

KV4000 RC Helicopter Outrunner Brushless Motor
  • KV4000 RC Helicopter Outrunner Brushless Motor
  • KV4000 RC Helicopter Outrunner Brushless Motor
  • KV4000 RC Helicopter Outrunner Brushless Motor
  • +7 KV4000 RC Helicopter Outrunner Brushless Motor
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 825 / PieceGet Latest Price

Product Details:
Minimum Order Quantity2 Piece
Voltage12 V
Size2 inch
Power3 KG/CM
Speed4000RPM
ModelX450
Load voltage14.8 V
Rotational Speed4000Kv (rpm/v)
Diameter0.26 mm
Motor Diameter27.5 mm
Motor Length31.5 mm
The Axial Length16 mm
Max KV Value3813 rpm/v
Load power360 W
Load Current24.3V



Additional Information:

  • Item Code: BLDCKV4400
  • Port of Dispatch: CHINA, MUMBAI, CHENNAI
  • Production Capacity: 20
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

30A Brushless Speed Controller ESC

REQUEST CALLBACK

30A Brushless Speed Controller ESC
  • 30A Brushless Speed Controller ESC
  • 30A Brushless Speed Controller ESC
  • 30A Brushless Speed Controller ESC
  • +7 30A Brushless Speed Controller ESC
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 590 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Input Value12 V
Current30 A
Pole TypeSingle Pole
Digit Display SizeSingle Display
UsageRobotics

ZTW Brushless ESCs are one of the most widely used and trusted speed controller brands available on the market today. They are sold under many different brand names, but we choose to purchase direct from the manufacturer without rebranding so that we can pass the savings on to you. ZTW controllers represent a new generation of brushless ESCs using advanced microprocessor technology. They are designed and manufactured with high quality components which provide exceptional reliability, low internal resistance, and a smooth, linear throttle response. ZTW ESCs are perfectly suited for airplane, helicopter, and multicopter use. The high power BEC found in ZTW ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

 

Features:

  • Extremely low internal resistance
  • Easy setup and operation
  • Auto detects number of battery cells
  • Super smooth and accurate throttle linearity
  • Safety thermal over-load protection
  • Auto throttle shut down in case of signal loss
  • Supports high RPM motors
  • Power arming protection (prevents the motor from accidentally running when switched ON)
  • New advanced programming software


Additional Information:

  • Item Code: ESCDRIVER30A
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 20
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

16 Channel 12bit PWM Servo Driver

REQUEST CALLBACK

16 Channel 12bit PWM Servo Driver
  • 16 Channel 12bit PWM Servo Driver
  • 16 Channel 12bit PWM Servo Driver
  • 16 Channel 12bit PWM Servo Driver
  • +7 16 Channel 12bit PWM Servo Driver
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 590 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Input Voltage12 V
Model Number12 BIT 16 CHANNEL SERVO CONTROLLER
Output Power5 V
PhaseSingle Phase

The 16-Channel I2C Servo Controller is an I2C-bus controlled 16-channel LED controller optimized for LCD Red/Green/Blue/Amber (RGBA) color backlighting applications. The PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its own 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency. Each LED output can be off or on (no PWM control), or set at its individual PWM controller value. The LED output driver is programmed to be either open-drain with a 25 mA current sink capability at 5 V or totem pole with a 25 mA sink, 10 mA source capability at 5 V. The PCA9685 operates with a supply voltage range of 2.3 V to 5.5 V and the inputs and outputs are 5.5 V tolerant. LEDs can be directly connected to the LED output (up to 25 mA, 5.5 V) or controlled with external drivers and a minimum amount of discrete components for larger current or higher voltage LEDs. The PCA9685 is in the new Fast-mode Plus (Fm+) family. Fm+ devices offer higher frequency (up to 1 MHz) and more densely populated bus operation (up to 4000 pF). Although the PCA9635 and PCA9685 have many similar features, the PCA9685 has some unique features that make it more suitable for applications such as LCD or LED backlighting and Ambilight: The PCA9685 allows staggered LED output on and off times to minimize current surges. The on and off time delay is independently programmable for each of the 16 channels. This feature is not available in PCA9635.



Additional Information:

  • Item Code: SERVODRIVE
  • Production Capacity: 20
  • Delivery Time: 1 to 3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY CHINA/MUMBAI/CHENNAI
Yes! I am Interested

DC Motor

REQUEST CALLBACK

DC Motor
  • DC Motor
  • DC Motor
  • DC Motor
  • +7 DC Motor
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity10 Piece
Voltage12 V/ 5 V
Power0.1 Kg
Speed range/RPM1000 RPM
CommutationDC MOTOR
PhaseSingle Phase

Easy to use low cost motor for robotics application. Nut for mounting motor firmly on body/chassis of robot. Internally threaded hole on shaft for easy mounting of wheels by using screws.



Additional Information:

  • Item Code: DCMOTOR
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 500
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

Motor Shield

REQUEST CALLBACK

Motor Shield
Get Best Quote

✓Thanks for Contacting Us.

Approx. Rs 271 / PieceGet Latest Price

Product Details:
Minimum Order Quantity10 Piece
Size6.8 cm x 5.5 cm x 2 cm - 2.68 inch x 2.17 inch x 0.79 inch
Model NumberL293D
Input Voltage5 V
Output Power600 MA



Additional Information:

  • Item Code: L293SHIELD
Yes! I am Interested

3.7G Mini Servo RC Plane Motors

REQUEST CALLBACK

3.7G Mini Servo RC Plane Motors
  • 3.7G Mini Servo RC Plane Motors
  • 3.7G Mini Servo RC Plane Motors
  • 3.7G Mini Servo RC Plane Motors
  • +7 3.7G Mini Servo RC Plane Motors
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity10 Piece
Motor Type DC
Speed0.12 Sec/60o (no load)
Voltage12 V
Power3.7G
Size(L x W x H): 20 x 17.6 x 8.0 mm
Torque0.4kg. Cm
Working Current100 mA
Static Current1 mA
Cable Length165 mm
Weight3.7 g



Additional Information:

  • Item Code: 37GSERVO
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 500
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

9G Mini Micro Servo Motors

REQUEST CALLBACK

9G Mini Micro Servo Motors
  • 9G Mini Micro Servo Motors
  • 9G Mini Micro Servo Motors
  • 9G Mini Micro Servo Motors
  • +7 9G Mini Micro Servo Motors
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity50 Piece
Motor Type DC
Speed60 RPM
Voltage12V
Power12V
Connector Wire Length150 mm
Weight (Kilogram)9 g
Size22 mm x 11.5 mm x 27 mm
Torque(4.8V): 17.5oz/in (1.2 kg/cm)
Temperature Range30 to +60 Degree
Dead Band Width7 usec
Operating Voltage3.0-7.2 Volts



Additional Information:

  • Item Code: 9GSERVO
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 500
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

BO1 60RPM DC Geared Motor

REQUEST CALLBACK

BO1 60RPM DC Geared Motor
  • BO1 60RPM DC Geared Motor
  • BO1 60RPM DC Geared Motor
  • BO1 60RPM DC Geared Motor
  • +7 BO1 60RPM DC Geared Motor
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity10 Piece
Speed60 RPM
Voltage12 V

Bo Geared DC Motor type 1 is one of the best choice in light weight robotics applications. It weighs only about 30g. This motor provide good torque and rpm with low power consumption. It wide operating voltage range, 3 ~ 9V and low power consumption makes it one of the preferred choice in battery powered applications.


Additional Information:

  • Item Code: BOMOTOR60RPM
  • Port of Dispatch: CHINA MUMBAI CHENNAI
  • Production Capacity: 100
  • Delivery Time: 1-3DAYS
  • Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested

Looking for DC Geared Motor ?
 
X
Our Product Range





Explore More Products

Contact Us

Contact via E-mail
Contact via SMS
Jain (Manager)
 RNDMFG
No. 10/15, Block EA, MMH Complex, Natesan Street, T. Nagar
Chennai - 600017, Tamil Nadu, India
Call Us: 
Call Response Rate: 1%
Share Us :
F G T L


Company Video


Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

© RNDMFG. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

RNDMFG