ProgrammingThe Arduino/Genuino Uno can be programmed with the (Arduino Software(IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see thereferenceandtutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with abootloaderthat allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference,C header files).You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header usingArduino ISPor similar; seethese instructionsfor details.The ATmega16U2 (or 8U2 in the rev1 and rev2 boards) firmware source code is available in the Arduino repository. The ATmega16U2/8U2 is loaded with a DFU bootloader, which can be activated by:
On Rev1 boards: connecting the solder jumper on the back of the board (near the map of Italy) and then rese ing the 8U2.
On Rev2 or later boards: there is a resistor that pulling the 8U2/16U2 HWB line to ground, making it easier to put into DFU mode.
You can then useAtmel's FLIP software(Windows) or theDFU programmer(Mac OS X and Linux) to load a new firmware. Or you can use the ISP header with an external programmer (overwriting the DFU bootloader). Seethis user-contributed tutorialfor more information.
UNO R3 Arduino Board
REQUEST CALLBACK
+7
Get Best Quote
✓Thanks for Contacting Us.
Approx. Rs 350 / PieceGet Latest Price
Product BrochureProduct Details:
Minimum Order Quantity
25 Piece
Model Number
Microcontroller
Power
5 V
Weight
25 g
Size
70 mmx54 mm
Length
68.6 mm
Width
53.4 mm
Speed
16 MHz
Core Size
8 Bit (Number of Bits)
RAM Size
2 K Bytes
The Arduino/Genuino Uno can be programmed with the (Arduino Software (IDE)). Select "Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files). You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header using Arduino ISP or similar see these instructions for details.
Specifications:
Number of Pins 28
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limit): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
PWM Digital I/O Pins: 6
Analog Input Pins: 6
DC Current per I/O Pin: 20 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328P)
EEPROM: 1 KB (ATmega328P)
Clock Speed: 16 MHz
LED_BUILTIN: 13
Additional Information:
Item Code: UNOR3
Pay Mode Terms: Other
Port of Dispatch: CHINA MUMBAI CHENNAI
Production Capacity: 500
Delivery Time: 1 TO 3DAYS
Packaging Details: BASED ON QTY CARTOON BOX SIZE MAY VARY
Yes! I am Interested
Aurdino Mega 2560
REQUEST CALLBACK
+8
Get Best Quote
✓Thanks for Contacting Us.
Approx. Rs 675 / PieceGet Latest Price
Product BrochureProduct Details:
Minimum Order Quantity
10 Piece
Clock Speed
16 MHz
Speed
16 MHZ
Input Voltage
6-20 V
Analog Input Pins
16
Description:
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Features:
Stronger Reset circuit.
Atmega 16U2 replace the 8U2.
Specifications:
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Digital I/O Pins 54 (of which 15 provide PWM output)
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 256 KB of which 8 KB used by bootloader
SRAM 8 KB
EEPROM 4 KB
Resettable polyfuse that protects PC USB ports from shorts and overcurrent
Core Size (Number of Bits) 16 Bit
ROM Type EEPROM Flash
Number of Pins 54, 100
Additional Information:
Item Code: MEGA2560
Port of Dispatch: CHINA MUMBAI CHENNAI
Production Capacity: 200
Delivery Time: 1-3DAYS
Packaging Details: CARTON BOX SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested
Arduino Promini 328 5V 16MHZ
REQUEST CALLBACK
+7
Get Best Quote
✓Thanks for Contacting Us.
Approx. Rs 191 / PieceGet Latest Price
Product BrochureProduct Details:
Minimum Order Quantity
10 Piece
Dimensions
0.7x1.3" (18x33mm)
Design
Standard
Output
Max 150mA
DC Input
Up to 12 V
It's the Enhancement V2 Pro Mini! It's thin (0.8mm)!This Mini board with a adjustable voltage regulator(you can setting the output voltage by yourself) running the 16MHz bootloader ((select 'Arduino Duemilanove w/ 328' within the Arduino software). This Pro Mini V2 does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It's a great board that will get you up and running quickly. The Enhancement V2 Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Enhancement V2 Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Specifications:
ATmega328 running at 16MHz
Adjustable voltage regulator(3.3V/5V)
USB connection off board
Supports auto-reset
Over current protected
Reverse polarity protected
On board Power and Status LEDs
Less than 2 grams
Additional Information:
Item Code: PROMINI5V
Port of Dispatch: CHINA, MUMBAI, CHENNAI
Production Capacity: 100
Delivery Time: 1-3DAYS
Packaging Details: CARTON PACKING SIZE AND WEIGHT MAY VARY BASED ON QTY
Yes! I am Interested
Arduino Uno R3 SMD
REQUEST CALLBACK
+7
Get Best Quote
✓Thanks for Contacting Us.
Approx. Rs 262 / PieceGet Latest Price
Product BrochureProduct Details:
Minimum Order Quantity
10 Piece
RAM Size
32 KB, 1 KB
ROM Type
EEPROM Flash
Number of Pins
28, 64
Operating Voltage
5 V
The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Features:
Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new
1.0 pinout: Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board
In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V
The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit
Atmega 16U2 replace the 8U2
"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0
The Uno and version 1.0 will be the reference versions of Arduino, moving forward
The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations)
This allows for faster transfer rates and more memory
No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc
Specifications:
Microcontroller: ATmega328
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHz
Length: 68.6mm
Width: 53.4mm
Weight: 25g
Speed(MHz) 16MHZ, 8MHZ
Core Size (Number of Bits) 8 Bit
Additional Information:
Item Code: UNOR3SMD
Port of Dispatch: China, Mumbai, Chennai
Production Capacity: 100
Delivery Time: 1-3DAYS
Packaging Details: Carton Packing Size And Weight May Vary Based On Qty