|Country of Origin
|Made in India
"ST-Link V2 Programmer For STM8 and STM32 is completely steady with the professional version, assist for computerized upgrades, assist the whole variety STM32 SWD (only 4pins together with SWCLK, SWDIO, and power) and a complete variety STM8 SWIM (simplest 4pins which include SWIM, Reset and strength) down load and debug.
Use this tool to send application code to the 32-bit STM32 ARM Cortex or eight-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. The connector on the alternative side of this tool is a USB connector and is supposed to be plugged into the laptop.
Features :PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!Interface definition directly marked on the shell, clear, convenient and practical!5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3VShell characters using laser engraving, never fade off! Permanent clarity!500MA internal resettable fuse, complete protection of your expensive computer motherboard!Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!With 4 DuPont line, so you can easily respond to different target board line order!Use anti-static bag packaging.
SWIM specific features:SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector1.65 V to 5.5 V application voltage supported on SWIM interfaceSWIM low-speed and high-speed modes supportedSWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speedSWIM cable for connection to the applicationDirect firmware update feature supported (DFU)Status LED which blinks during communication with the PCOperating temperature 0 to 50°C
Package Includes:1 x ST-Link V2 Programmer For STM8 and STM32.1 x Connecting Wires.
Specifications :Programmer For STM8 and STM32
Length (mm) 56
Width (mm) 20.5
Height (mm) 8.5
Weight (gm) 15
Shipment Dimensions 7 × 3 × 3 cm