Robotic

Approx. Rs 16 / PieceGet Latest Price

Product Details:

Description A flange is an external or internal ridge, or rim (lip), for strength, as the flange of an iron beam such as an I-beam or a T-beam or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera or for a flange of a rail car or tram wheel. Thus flanged wheels are wheels with a flange on one side to keep the wheels from running off the rails. The term "flange" is also used for a kind of tool used to form flanges. Pipes with flanges can be assembled and disassembled easily. When selecting gas pipe for your home, LDR pipe and fittings are the way to go. The durable black iron is 100% pressure tested and protected right at the factory.

Features:

• Black malleable iron construction
• Not for use with drinking water
• Maximum working pressure of 150 psi
• Varnish helps protect fitting from corrosion
• Hydrostatically tested
• Meets ASTM standards
• For use on natural gas, liquefied petroleum or air supply lines
• UL and FM certified

 

Applications:

• Fittings and pipe are available in a array of sizes for residential gas
• air and liquefied petroleum
• oil and gas subsea or riser applications
• cold work and cryogenic applications
• gas injection applications
• high-temperature applications
• nuclear applications

Approx. Rs 16 / PieceGet Latest Price

Product Details:

Dead Axle are used for mounting wheels to the chassis, without the need for additional motors. So, you can have 2 geared motors at the back, and 2 dead axle in the front for mounting 4 wheels to the robotic car chassis. Good Quality Dummy motor made with Plastic with 6mm shaft diameter. Use e type cir—clip for holding the wheel Shaft Dia 6mm length 12mm. A DC motor clamp or a bracket is used to mount the motor tightly on any solid surface. Thus it increases the usability of the motor & makes motor mounting very convenient. This clamp or mount bracket is designed for DC Geared Motors.

Features:

• 2 screw Hole for fixing on cabinet
• Nut for Fixing with Cabinet
• Shaft with 3mm Hole for wheel tightening

Product Price :Get Latest Price

Product Details:

A worm drive is a gear arrangement in which a worm (which is a gear in the form of a screw) meshes with a worm gear (which is similar in appearance to a spur gear). The two elements are also called the worm screw and worm wheel. The terminology is often confused by imprecise use of the term worm gear to refer to the worm, the worm gear, or the worm drive as a unit. Like other gear arrangements, a worm drive can reduce rotational speed or transmit higher torque. The image shows a section of a gear box with a worm gear driven by a worm. A worm is an example of a screw, one of the six simple machines.

Description:

• A gear consisting of a shaft with a spiral thread that engages with and drives a toothed wheel.
• The toothed wheel driven in this way. Worm gears are an old style of gear, and a version of one of the six simple machines. Basically, a worm gear is a screw butted up against what looks like a standard spur gear with slightly angled and curved teeth. It changes the rotational movement by 90 degrees, and the plane of movement also changes due to the position of the worm on the worm wheel (or simply "the wheel"). They are typically comprised of a steel worm and a brass wheel. A gearbox designed using a worm and worm-wheel is considerably smaller than one made from plain spur gears, and has its drive axes at 90° to each other. With a single start worm, for each 360° turn of the worm, the worm-gear advances only one tooth of the gear. Therefore, regardless of the worm's size (sensible engineering limits notwithstanding), the gear ratio is the "size of the worm gear - to - ". Given a single start worm, a 20 tooth worm gear reduces the speed by the ratio of 20:1. With spur gears, a gear of 12 teeth (the smallest size if designed to good engineering practices) must match with a 240 tooth gear to achieve the same 20:1 ratio. Therefore, if the diametrical pitch (DP) of each gear is the same, then, in terms of the physical size of the 240 tooth gear to that of the 20 tooth gear, the worm arrangement is considerably smaller in volume.

Applications:

• Presses
• Rolling Mills
• Conveying Engineering
• Mining Industry Machines
• Rudders
• Worm Drive Saws
• Milling
• Rotary Tables
• Automation
• Process Control